Guide · Animals and daily care
How to make and print QR tags for your kennels
Make a batch of tags in the app and print them straight onto a sheet of labels. Free, on your own printer.
- Takes about10 minutes, once
- Who can do thisNeeds the Staff role (or higher)
- Steps6
Steps
Tick “I did this” as you go. This page remembers your ticks on this device, so you can come back later.
Step 1: Open Settings → QR tags and click Make tags
QR tags lists every tag your shelter holds, what each one is on, and whether it is in use. Kennel labels, beside it, is the printing page.
Step 2: Choose the label sheet and the number of tags
Pick the pack of labels in your printer. Number of tags starts at one full sheet of that stock - 80 on the one-inch square labels - and goes up to 500 at a time.
Step 3: Click Make tags and print
Rescuely makes the codes for your shelter and opens Kennel QR labels with them already on the sheet. Nothing to type or paste.
Step 4: Calibrate this printer, the first time
On the label page, choose Calibrate this printer, then Print the test page on plain paper. Hold it against a real label sheet, enter how far out it came in Across (mm) and Down (mm), and Save offset. It is saved for that computer and printer, so you do this once.
Step 5: Print at 100%
Back on the label page, click Print. In the print dialog set the scale to 100% or Actual size, never Fit to page, and turn headers and footers off.
Step 6: Put one on each kennel door
At a height someone can scan without crouching. Each new tag shows as Empty under QR tags until you scan it and point it at a kennel, so spares can stay on the sheet.
Good to know
Printing your own tags is free, and it is the only way to get them - Rescuely does not sell printed labels. The ten characters under each square are the tag’s code, so a tag the camera will not read can still be typed in.
Related
- Questions and answers: Animals and daily care
- What it does: QR care log
- Every guide: All step-by-step guides on one list
Other guides in Animals and daily care
How to record an animal coming into your care
A four-step wizard: the animal, how it arrived, its condition, then a check before saving.
5 steps · 3–5 minutes
How to record an animal leaving your care
Adoption, return to owner, transfer, or the outcomes nobody enjoys recording.
3 steps · 2–5 minutes
How to use the kennel board
See who is where, and move them - with a mouse, a finger, or a keyboard.
4 steps · Ongoing, seconds per move
How to log feeding, weight or an issue with the QR sticker
Scan the kennel door, tap a button, done - even with no signal.
3 steps · Seconds
How to put a QR tag on a kennel
Scan the tag and choose its kennel, once. Animals move in and out on the kennel board; the tag never needs changing.
7 steps · Under a minute per kennel