Guide · Animals and daily care
How to put a QR tag on a kennel
Scan the tag and choose its kennel, once. Animals move in and out on the kennel board; the tag never needs changing.
- Takes aboutUnder a minute per kennel
- Who can do thisNeeds the Staff role (or higher)
- Steps7
Steps
Tick “I did this” as you go. This page remembers your ticks on this device, so you can come back later.
Step 1: Scan the new tag with your phone
Sign in first. A tag that is not set up yet says This kennel is empty and offers Put an animal on this tag. Tap it.
Step 2: Choose the kennel the tag is on
Under Which kennel is this tag on?, pick the Location, then the kennel. Each kennel lists who is in it now, or Empty, so you can tell you have the right door. Search kennels finds one by its name or by an animal in it.
Step 3: Tap Point at the kennel
The button names the kennel you chose, such as Point at Run 2. From now on, scanning the tag shows whoever the kennel board has housed there.
Step 4: Scan it to check
With one animal in the kennel, the scan opens that animal’s care screen. With several, it asks Who is in Run 2 and you pick one. With none, it says Run 2 is empty.
Step 5: Move animals on the kennel board, not on the tag
The tag reads the kennel board at the moment it is scanned, so moving an animal with Move then Put here is all it takes. If a scan opens the wrong animal, the board is wrong: fix the board and the tag is right again.
Step 6: Move a tag to another kennel
If you peel a tag off and stick it on another door, open Settings → QR tags, choose Reassign on that tag, pick the new kennel and tap its Move to button.
Step 7: Retire a torn or lost tag
Under QR tags, Retire takes a tag out of service for good. Scanning a retired tag says it is no longer in use. This cannot be undone.
Good to know
An animal with no kennel, such as one in foster, can have a tag of its own: on the same screen choose Point at one animal instead, or open the animal’s record, choose QR sticker and use Assign a tag to this animal. An animal’s own tag comes off by itself when its outcome is recorded. No kennels in the list yet? Add them first; see setting up locations and kennels.
Related
- Questions and answers: Animals and daily care
- What it does: QR care log
- Every guide: All step-by-step guides on one list
Other guides in Animals and daily care
How to record an animal coming into your care
A four-step wizard: the animal, how it arrived, its condition, then a check before saving.
5 steps · 3–5 minutes
How to record an animal leaving your care
Adoption, return to owner, transfer, or the outcomes nobody enjoys recording.
3 steps · 2–5 minutes
How to use the kennel board
See who is where, and move them - with a mouse, a finger, or a keyboard.
4 steps · Ongoing, seconds per move
How to log feeding, weight or an issue with the QR sticker
Scan the kennel door, tap a button, done - even with no signal.
3 steps · Seconds
How to make and print QR tags for your kennels
Make a batch of tags in the app and print them straight onto a sheet of labels. Free, on your own printer.
6 steps · 10 minutes, once